Back
Next
Rev-A-Shelf Convenience Hardware
FineLine LED Linear Light
Infinex Angled Extrusion
Pencil thin but still packing a big punch, FineLine is the unobtrusive way to provide stunning lighting to casework, displays, store fixtures and more. The low-profile design features a milk diffuser for even illumination, Luniform technology, and with optional manual or remote-control dimmers, creating the perfect atmosphere is effortless.
Included: (1) Light Fixture, (1) 79" (2m) Starter Cord, (1) AMP Connector and Mounting U-Clips.
Infiniex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixture sizes, simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is available in size profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. Angled Infinex is for corner mounting with screws only. Fixture directs light at a 30-degree angle and uses Infinex specific starter leads. End caps, starter cords, LED FlexTape and power supplies sold separately. Simple DIY assembly & installation.
Included: (1) Extrusion
Part Number
Watts per Foot
Volt
Length
Color Temperature
Color
RVLSTKHO8CNI1
4.40
12
8"
5000K
Nickel
RVLSTKHO8WNI1
4.40
12
8"
3000K
Nickel
RVLSTKHO12CNI1
4.40
12
12"
5000K
Nickel
RVLSTKHO12WNI1
4.40
12
12"
3000K
Nickel
RVLSTKHO22CNI1
4.40
12
22"
5000K
Nickel
RVLSTKHO22WNI1
4.40
12
22"
3000K
Nickel
RVLSTKHO34CNI1
4.40
12
34"
5000K
Nickel
RVLSTKHO34WNI1
4.40
12
34"
3000K
Nickel
Part Number
Length
Color
RVLXANG72SC1
72"
Satin Nickel
Stick LED Link Cord
Angled Infinex End Cap Set
Set of 2 end caps for Angled Infinex extrusions.
Included: (2) End Caps
Gray

Part Number: RVLXANGECPGY1
FineLine link cords with pre-attached male/female connections. Various lengths from 2" - 72".
Included: (1) Link Cord
Part Number
Volt
Length
RVLLEDSTKLNK251
12
10"
RVLLEDSTKLNK1201
12
48"
RVLLEDSTKLNK1801
12
72"
Infinex Curved Extrusion
Transformer Amp Mount Block
Infinex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixture sizes, simply choose your style, cut to desired length and assemble to create a customezed LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is available in six profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. Can be mounted using U-Clips, Magnets, or screws. Mouting accessories, end caps, starter cords, LED FlexTape and power supplies sold separately. Simple DIY assembly & installation.
Included: (1) Curved Extrusion and mounting screws.
12VDC Black add-on mounting block accomodates up to 6 fixtures. Multiple mounting blocks can be used on one power supply not to exceed 60W maximum load.
Included: (1) 6-Snap Mounting Block
Part Number
Volt
Color
RVLTRANSMNTBL1
12
Black
Wireless Dimmer Receiver
Part Number
Length
Color
RVLXCRV72SC1
72"
Satin Nickel
Tresco Lighting brings simplicity to your low voltage LED systems. Nowhere is this more evident than our new FREEDiM Series Universal Receiver. This Receiver connects between Tresco's Universal 12/24VDC Power Supply and any of our dimmable LED lights, then gets synced up with any of the four new FREEDiM Series Wireless Controller options (Deco Wall Dimmer, Micro Dimmer, and 3/6-Zonce Remotes). One touch pairing makes programming your Controller and Receiver quick and easy. 60W Capacity (12VDC); 96W Capacity (24VDC) meaning they can handle the full load of Tresco's largest 12/24VDC Power Supplies.
Included: (1) Recevier
Curved Infinex End Cap Set
Set of 2 end caps for Curved Infinex extrusions.
Included: (2) End Caps
Gray

Part Number: RVLXCRVECPGY1
Part Number
Color
RVLWLD1REC1
White
Infinex Flush Extrusion
FREEDiM Series Micro Dimmer
Love the convenience of remote dimmers but can't seem to keep track of yours? Try our new low profile, wireless FREEDiM Series Micro Dimmer. The mounting case comes with an integrated magnet for mounting to metallic surfaces, or can be screw mounted to any wood surface as well. With smooth dimming, a simple one-buttom control, and the freedom to place it anywhere with 65 feet of the Universal Receiver, the Mirco truly is a game-changing addition to the Tresco offering.
Included: (1) Dimmer

A single dimmer can be programmed to up to 10 different receivers.

A single receiver can be programmed to up to 8 differnt FREEDim Series remotes/dimmers.

Must purchase 12VDC to 24VDC Controller Adaptor Cord set for 24VDC LED fixtures.
Infinex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixture sizes, simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safetly certification and is available in size profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. Designed for channels that go the entire width or height of the casework. Starter cords, LED FlexTaoe and Power Supplies sold separately. Simple DIY assembly & installation.
Included: (1) Flush Extrusion with unattached milk diffuser.
Part Number
Length
Color
RVLXFL72SC1
72"
Satin Nickel
RVLXFL96SC1
96"
Satin Nickel
Part Number
Color
RVLWLD1RNDBL1
Black
RVLWLD1RNDNI1
Nickel
Infinex Linking Cord
FREEDiM Series Deco Wall Dimmer
The FREEDim Series Deco Wall Dimmer's innovative, patent-pending design combines the convenience and flexibility of a remote dimmer with the style and fuctionality of a traditional hardwired switch. Designed to fit standard electrical boxes and Decora style wall plates, this groundbreaking new wireless technology will drastically reduce materials and labor costs without sacrificing quality or style.
Included: (1) Wall Dimmer

A single dimmer can be programmed to up to 10 different receivers.

A single receiver can be programmed to up to 8 different FREEDiM Series remotes/dimmers.
Linking Cords of various lengths and wire colors for connecting multiple Infinex features.
Included: (1) Male AMP Link Cord, (1) Female AMP Link Cord, (1) wrench and VHB tape.
Part Number
Volt
Length
Color
RVLXLNK15BL1
12
6"
Black
RVLXLNK15WH1
12
6"
White
Infinex Lighting Cord
Part Number
# of Zones
Color
RVLWLD1WALWH1
1
White
RVLWLD2WALWH2
2
White
12VDC 79" (2m) Starter Cord, Black, for Square, Curved, Round and Angled Infinex.
Included: (1) Starter Cord
FREEDiM Series 3-Zone Remote Dimmer
Part Number
Volt
Length
Color
RVLXPKT2MBL1
12
79"
Black
RVLXPKT2MWH1
12
79"
White
Take control of multiple lighting zones without haing to keep track of multiple remotes or wall switches with our new FREEDiM Series 3-Zone Remote Dimmer. Set the ambiance levels you want, and store them as scenes to be recalled later with only the touch of a button.
Included: (1) Dimmer and (1) Magnetic Docking Tray

A single receiver can be programmed to up to 8 different FREEDiM series remotes/dimmers.
Infinex Recessed Extrusion
Part Number
Color
RVLWLD3RMTBL1
Black
Wireless Door Sensor Receiver
 Infinex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixtures sizes, simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is avaialbe in size profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. Grooved sides allow extrusion to pressure fit into place. End caps, starter cords, LED FlexTape and power supplies sold separately. Simple DIY assembly & installation.
Included: (1) Recessed Extrusion
60W Capacity (12VDC); 96W Capcity (24VDC). Install between power supply power supply and lights with simple one button pairing with FREEDiM Series Wireless Door Sensors.
Included: (1) Receiver, (1) set of 24V Adaptor Cords.

Single receiver can be programmed with up to (4) sensors allowing up to 4 door to control the same light fixtures.
Part Number
Length
Color
RVLXREC72SC1
72"
Satin Nickel
Part Number
Input Voltage
Color
RVLWLDSREC1
12/24 VDC
White
Recessed Infinex End Cap Set
FREEDiM Wireless Door Sensors
 Set of 2 end caps for Recessed Infinex extrusions.
Included: (2) End Caps
Gray

Part Number: RVLXRECECPGY1
Infinex Round Extrusion
Allows light to be controlled by multiple doors with up to (4) sensors paired to a single receiver. No cumbersome, messy wires to have to hide inside your cabinetry.
Included: (1) Sensor, (2) Screws, (1) Double-stick adhesive and (3) Stick-on magnet covers.
Part Number
Color
RVLWLDSBL1
Black
RVLWLDSNI1
Nickel
Infinex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixtures sizes, simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is available in size profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. U-clip mounting allows fixture to be rotated in 15-degree increments either direction. U-Clips, End Caps, starter cords, LED FlexTape and power supplies sold separately. Simple DIY assembly & installation.
Included: (1) Round Extrusion
Infinex Diffusers
Clear Diffuser for use with any Infinex extrusion profiles. Easily cuttable and snaps in/out of extrusion channel, providing protection from LEDs without reducing light ouput.
Part Number
Length
Color
RVLXRND72SC1
72"
Satin Nickel
Frosted Diffuser for use with any Infinex extrusion profiles. Provides a softer light with less glare and uniform intensity and light output.
Round Infinex End Cap Set
Milk/Opal Diffuser lens for use with any Infinex extrusion profiles. Eliminates LED hot spot diode reflection on reflective surfaces and provides a soft, uniform light output.
Set of 2 end caps for Round Infinex extrusions.
Included: (2) End Caps
Gray

Part Number: RVLXRNDECPCGY1
Included: (1) Diffuser
Part Number
Length
Lens
RVLX72DIFFCL1
72"
Clear
RVLX72DIFFFR1
72"
Frosted
RVLX72DIFFMLK1
72"
Milk
Round Infinex Extrusion U-Clips
Set of 2 U-Clips for Round Infinex extrusions.
Included: (2) Mounting U-Clips
Gray

Part Number: RVLXRNDUCLP1
N1 Side - Emitting Neoloop
* Durable, flexible silicone construction with a flat illuminated side bendable.
* 3W/ft. Luniform output for continuous illumination.
* Sold in 16.4' (5m) rolls and cuttable every 1" (25mm).
* Linkable with DIY connectors - no soldering required!
* 79" (2m) Starter Cords are molded on each end for easy installation.
* Groove for recess mounting or surface mount with U-Clips in indoor, outdoor, damp and wet locations* (*when used with factory-installed inputs).
* Included: (1) Roll with 79" (2m) starter cords molded on each end.
Infinex Square Extrusion
Part Number
Watts per Foot
Volt
Length
Color Temperature
RVLN112V3WM30K5M1
3
12
16.4'
3000K
RVLN112V3WM35K5M1
3
12
16.4'
3500K
RVLN112V3WM48K5M1
3
12
16.4'
4800K
Infinex is the innovative, patented, LED aluminum extrusion system by Tresco Lighting. Gone are the days of set fixture sizes, simply choose your style, cut to desired length and assemble to create a customized LED fixture. Designed by our in-house engineers and made in the USA, Infinex carries a UL safety certification and is available in six profiles with an array of installation options. Infinex is designed for easy DIY application. We also offer prefabricated custom solutions with a minimum quantity order. Surface mount using magnets, U-clips or screws. Mounting accessories, end caps, starter cords, LED FlexTape and power supplies sold separately. Simple DIY assembly & installation.
Included: (1) Square Extrusion
N1 Side - Emitting Neoloop Links
Part Number
Length
Color
RVLXSQR72SC1
72"
Satin Nickel
Part Number
Length
Color
RVLN1LNK251
10"
White
RVLN1LNK601
24"
White
RVLN1LNK1201
48"
White
RVLN1LNK1801
72"
White
Square Infinex End Cap Set
Set of 2 end caps for Square Infinex extrusions.
Included: (2) End Caps
Gray

Part Number: RVLXSQRECPGY1
Square/Curved Infinex Swivel Clip Set
N1 Side - Emitting Neoloop Start Cord
79"
12 volt
White

Part Number: RVLN112PKT2M1
N1 Side - Emitting Neoloop Back to Back Connector
White

Part Number: RVLN1BTB1		 Need to control the direction of the beam angle for your Square or Curved Infinex fixture? These Swivel Clips will do the trick.
Included: (2) Mounting Swivel Clips
Gray

Part Number: RVLXSQRSWCLP1
Square/Curved Infinex U-Clip Set
Set of 2 U-Clips for Square or Curved Infinex extrusions.
Included: (2) Mounting Clips
Gray

Part Number: RVLXSQRUCLP1
N1 Side - Emitting Neoloop End Cap
White

Part Number: RVLN1ENDCAP1		 N1 Side - Emitting Neoloop U-Clips
White

Part Number: RVLN1UCLP1
N2 Top - Emitting Neoloop
* Durable, flexible silicone construction with a curved illuminated top bendable.
* 3W/ft. Luniform output for continuous illumination.
* Sold in 16.4' (5m) rolls and cuttable every 1" (25mm).
* Linkable with DIY connectors - no soldering required!
* 79" (2m) Starter Cords are molded on each end for easy installation.
* Groove for recess mounting or surface mount with U-Clips in indoor, outdoor, damp and wet locations* (*when used with factory-installed inputs.)
* Included: (1) Roll with 79" (2m) starter cords molded on each end.
Part Number
Watts per Foot
Volt
Length
Color Temperature
RVLN212V3WM30K5M1
3
12
16.4'
3000K
RVLN212V3WM35K5M1
3
12
16.4'
3500K
RVLN212V3WM48K5M1
3
12
16.4'
4800K
N2 Side - Emitting Neoloop Links
Part Number
Length
Color
RVLN2LNK251
10"
White
RVLN2LNK601
24"
White
RVLN2LNK1201
48"
White
RVLN2LNK1801
72"
White
N2 Top - Emitting Neoloop Start Cord
79"
12 volt
White

Part Number: RVLN212PTK2M1
N2 Top - Emitting Neoloop Back to Back Connector
White

Part Number: RVLN2BTB1
N2 Top - Emitting Neoloop End Cap
White

Part Number: RVLN2ENDCAP1		 N2 Top - Emitting Neoloop U Clips
White

Part Number: RVLN2UCLP1
Back
Next
U.S. Industrial Fasteners Phone: 480-967-8702 / Toll Free 800-289-5386
2026 East Cedar Street Tempe, Arizona 85281