Back
Next
FastCap
1, 2, 3
Pocket Chisels
Magnetic Micro Square
Outside scale for blade height
Inside scale for layout
Buy them individually or in a kit!
The Magnetic Micro Square™ makes squaring up your saws or other pieces of equipment effortless! The square sticks firmly to the cast iron table and allows hands free adjustment of spindles, blades and fences.
Features...
* Imperial scale and Metric scale
* Store it on your saw with built in magnets
* 2 neodymium magnets embedded in the base
Pocket Diamond Sharpener - 300/600 grit
Part Number
Description
88FCMAGMICROSQ Mag Micro Square
Pocket Putty Knife
Pocket Chisel 1" Blade
AccuScribe Pro
Pocket Chisel 3/4" Blade
Pocket Chisel 1/2" Blade
Pocket Chisel 1/4" Blade
The Pocket Chisel™ is made of precision tool steel and has a heavy duty nylon handle that locks when opened and will stay locked so that you can hammer the hell out of it. The AccuScribe Pro™ makes it easy to maintain a consistent scribe offset, staying parallel to the object surface everytime. It is ideal for flooring, counter tops, scribing trim on cabinets and more.
Part Number
Description
88FCPCKIT Pocket Chisel Kit
88FCPCDIAMSHRPNR Pocket Diamond Sharpener
88FCPCPTYKNIFE Pocket Putty Knife
88FCPC1 Pocket Chisel 1" Blade
88FCPC3/4 Pocket Chisel 3/4" Blade
88FCPC1/2 Pocket Chisel 1/2" Blade
88FCPC1/4 Pocket Chisel 1/4" Blade
88FCPCCASE Hard Shell Case (Green)
Features...
* Flat bottom for precise marking
* Retractable compass point
* Built-in pencil sharpener		 Great for...
* Making a radius
* Marking gauge
* Scribing
Part Number
Description
88FCACCUSCRIBE AccuScribe Pro
FastBreak
ProCarpenter Tape Measures
The ProCarpenter Tape Measures™ are developed with 7 great innovative features: Lever action belt clip, Pencil sharpener, Dual locking system, Erasable notepad, Heavy-duty, 1" blade, High-contrast tape and Rugged compact design.
Our FastBreak™ sanders uniformly break both edges on sharp melamine, edgebanding and hardwood material in just one pass. For larger panel stock the FastBreakXL will sand up to 2-3/8"
The Old Standby features Standard measurements that are readable from either the right or left hand.
Features...
* Break both edges in one pass
* Comes with 80 & 180 grit
* Convenient sandpaper storage		 Great for...
* Melamine
* Edgebanding
* Door (FastBreakXL)
The Story Pole features a blank edge on the blade for writing and standard measurements on the other edge.
Part Number
Description
88FCFASTBREAK FastBreak
88FCFASTBREAKXL FastBreak XL for larger panel stock
88FCFB180GRIT10PC Sandpaper 180 Grit - 10 pc
88FCFB80GRIT10PC Sandpaper 80 Grit - 10 pc
The Standard/Standard Reverse features standard measurements that are readable from the right or left hand.
The PMS features Metric and standard measurements identifying increments down to 1/16" and millimeter.
TriBlade
The Metric/Metric Reverse features metric measurements that are readable from right or left hand.
Holds 2 extra blades
Part Number
Description
88FCPS16 1" x 16' Old Standby Tape Measure
88FCPS25 1" x 25' Old Standby Tape Measure
88FCPS30 1" x 30' Old Standby Tape Measure
88FCPSSPFLAT16 1" x 16' Flat Back Story Pole Tape Measure
88FCPSSR16HD 1" x 16' Standard Reverse Tape Measure
88FCPSSR25 1" x 25' Standard Reverse Tape Measure
88FCPMS12 1" x 12' Metric/Standard Tape Measure
88FCPMS16HD 1" x 16' Metric/Standard Tape Measure
88FCPMS25 1" x 25' Metric/Standard Tape Measure
88FCPMMRTRUE32 1" x 16' True 32 Metric Reverse Tape Measure
Heavy-Duty steel track with positive double tooth locks Automatic blade lock resists 55 lbs of force
The Triblade Utility Knife™ has a unique design that allows for additional storage of 2 extra blades. The rubberized grip makes it comfortable to hold and the retractable self-locking blade makes the TriBlade safe to use. Includes 3 heavy duty snap off blades.
Part Number
Description
88FCTRIBLADE TriBlade Knife
88FCTRIBLRPLC Replacement Blade 10 pk
AutoLock Tape Measure
The FatBoy Pencil
Push release to retract Lever action belt clip
Never break your lead again with The FatBoy™ Pencil. It combines the utility of a mechanical pencil with the strength of a carpenter pencil. Easily sharpens in a standard pencil sharpener and this unbreakable 5.5mm lead stays sharp longer. Includes 3 lead.
Blade automatically locks in the "out" position Pencil sharpener
Features...
* Lightweight aluminum housing
* Removable clip
* Built-in eraser		 Great for...
* Framing
* Finish work
* General use
The ProCarpenter AutoLock™ tape measure has all the features of the original ProCarpenter, plus the autolock and super-ergonomic design. Simply pull the blade out and it stays in place then push the release button to retract the blade.
Part Number
Description
88FCFBP The FatBoy Pencil
88FCFBPREFIL FatBoy Replacement Lead & Erasers
Part Number
Description
88FCPMS16AUTOLOCK 1" x 16' ProCarpenter AutoLock Tape Measure
Peel & Stick Reversable Tape Measure
Taper Lock & Tip Mag
The flat 16' long tape measure is printed on both sides allowing for left or right read. Simply adhere the included SpeedTape to one side of the tape and stick it on.
Part Number
Description
88FCPSSTICK16 1" x 16' Standard Peel & Stick Tape Measure
88FCPMSSTICK16 1" x 16' Metric/Standard Peel & Stick Tape Measure
Tip Mag
Taper Lock
TaperLock Features...
* One-hand operation
* Grips any length of bit
* Fast and easy bit changes		 Tip Mag Features...
* Powerful Neodymium magnets
* Fits on nearly any driver
* Holds the screws on
SpeedClip
Built in sharpener for a normal pencil The TaperLock™ and Tip Mag™ are two of the FastCap staff's favorite products! The TaperLock grips any bit while the Tip Mag holds onto the screws. What more could you ask for ...buy them together or separately.
Holds a normal pencil or carpenter pencil
Extension keeps tape measure from getting bumped off when bending down
Part Number
Description
88FCTAPERLOCK Taper Lock
88FCTIPMAG Tip Mag
Never have torn pants again. Securing your tape measure is a breeze with the SpeedClip™. It easily clips over your pants or belt or screws to a workbench. It can hold and sharpen a pencil.
PowerHead Screws
Part Number
Description
88FCSPEEDCLIP Speed Clip
Flush Cut Series
The Micro Flush Cut Trimmers™ design allows you to get into tight spots when removing brad nails or small slivers.
(Ok to pull nails, not recommended for cutting nails)
The Macro Flush Cut Trimmers™ works great with wood and PVC edgebanding with standard thickness of .018"-.025" The PowerHead Screws™ has an oversized flat head to completely eliminate pull-through. The oversized head has 4x the holding power than a conventional screw head and can be finished with a 9/16" or 18mm Fastcap.
Not recommended for 3mm edgebanding, nails or screws) Features...
* Flat oversized 9/16" head
* Self-tapping for wood & metal
* Zinc coated for corrosion resistance		 Great for...
* Cabinets
* "Invisible" fasteners for Fastcaps
* Fastening to metal studs
The Heavy Duty (HD) Flush Cut Trimmer™ cut nails flush. Includes two high powered neodymium magnets to help catch metal debris.
Part Number
Description
Box Quantity
88FCPHZ8ME22000PC 8 x 2 Square Powerhead
2,000
88FCPHZ825150SQ 8 x 2 1/2 Square Powerhead
150
88FCPHZ8251500SQ 8 x 2 1/2 Square Powerhead
1,500
88FCPHZ8350SQ 8 x 3 Square Powerhead
50
88FCPHZ831500SQ 8 x 3 Square Powerhead
1,500
(Not recommended for hardened screws)
The End Nippers™ have a flush 1" wide head that can be used for cutting fret wires, up to 3mm edgebanding and a variety of other applications.
(Not recommended for cutting nails. Great for metals like brass & copper)
Kolbe Korner
The Stainless Steel Fret Nippers™ are a special new fret nipper designed by a Luthier for a beautiful flush trim on your frets everytime.
(Not recommended for cutting nails. Great for metals like brass & copper)
The Power Shears™ are small and compact, yet razor sharp and cut through the toughest material like veneer, burlap or even aluminum
Secure mounting of the drawer front Bracing for drawer bottoms
Nylon
Part Number
Description
88FCPLIERSMICRO Micro Flush Cut Trimmers
88FCPLIERSFC Macro Flush Cut Trimmer
88FCPLIERSFCHD Heavy Duty Flush Cut Trimmers
88FCPLIERSENDNIP End Nip Trimmers
88FCPLIERSFRETNIP Stainless Steel Fret Nippers
88FCPOWERSHEARS Power Shears
Part Number
Color
Description
88FCKK50PCBL
Black
 50 Pack
88FCKK50PCCM
Clear Maple
 50 Pack
88FCKK50PCLM
Light Maple
 50 Pack
88FCKK50PCWH
White
 50 Pack
88FCKK500PCLM
Light Maple
 500 Bulk Pack
88FCKK500PCWH
White
 500 Bulk Pack
Power Mags
Metal
Part Number
Color
Description
88FCKK50PCALUM
Aluminum
 50 Pack
88FCKK50PCMTLTN
Tan
 50 Pack
88FCKK50PCMTLWH
White
 50 Pack
88FCKK500PCMETALTN
Tan
 500 Bulk Pack
88FCKK500PCMETALWH
White
 500 Bulk Pack
Small and powerfull!
Drawer Bumper
PowerMags™ will transform the way you use magnets. These versatile, high-performance neodymium magnets can be used to make invisible magnetic catches, as well as hold anything and everything metal. Get creative!
Holey PowerMags™ feature holes to accommodate a screw for attaching the magnet to your surface. The magnets are countersunk for 3/8" PowerHead Screws.
Part Number
Description
88FCPOWERMAG 9/16" PowerMags (10 pack)
88FCPOWERMAGH18 9/16" PowerMags with 1/8" Hole (10 pack)
The Drawer Bumper protects doors from unintentional marring by drawer pull-outs.
Part Number
Description
88FCDRAWERBUMP Drawer Bumper 10 pc
Super Mag
12 lb load capacity
The Super Mag™ is great for anything you want to hold something to a metal surface. It is powered by 6 high performance neodymium magnets encased in soft non marring EVA. An extra long knob allows for quick placement and removal.
Part Number
Description
88FCSUPERMAG Super Mag
Back
Top
Next
U.S. Industrial Fasteners Phone: 480-967-8702 / Toll Free 800-289-5386
2026 East Cedar Street Tempe, Arizona 85281